Key facts. The high-skilled route needs the principal's permit to be valid for at least 16 months after your application is received, and the permanent residence routes need 6 months. Since January 21, 2025 that route covers spouses and common-law partners only. Cost: C$155 plus a C$100 holder fee, plus C$85 biometrics. Published processing: 95 days.

Who a family member is, and who cannot apply

A family member in this context is a spouse, a common-law partner, a dependent child, or a dependent child of a dependent child. One structural rule governs the whole route: a dependent child cannot be the principal applicant. The child travels as a family member of the parent who holds the permit, which means the child's eligibility follows the parent's status rather than standing on its own.

That matters for a practical reason. A dependent child may qualify through a pathway that their parent does not, and in some regional programmes only the children and their children are eligible while a spouse has to use a different route entirely. In those pilots the spouse cannot simply be added to the family's application.

The family member also has to meet the general work permit requirements in their own right: eligibility, admissibility and no prohibition. If they are in Canada, they need a valid temporary resident status, or they need to have applied to extend before their status expired so that they hold maintained status, or they need to be eligible for restoration. The minimum working age is set by the province or territory where the work will happen, not by federal immigration law.

One more condition is about the relationship itself. The relationship has to be genuine, and the evidence for it has to be in the file: a marriage certificate, a common-law declaration on form IMM 5409, birth certificates, adoption records. A relationship that cannot be documented in the documents is treated as undocumented, and the application is decided on what is in the file.

The six pathways and their conditions

There is no single spousal open work permit rule. There are six distinct pathways, each with its own conditions, and each exists because the policy has moved in a specific direction over the last few years. Applying under the wrong pathway is the most common reason a family application is refused.

Pathway Principal applicant must Key condition
1. Permanent residence applicant, already filedHas applied under an eligible economic or pilot programme, holds a valid or approved work permit in a non-family category, and the permit is valid in Canada for at least 6 months after the family application is receivedLives and works in Canada, or plans to
2. Permanent residence pathway, not yet appliedHolds a valid work permit or authorisation to work, is employed or to be employed in a low-skilled TEER 4 or 5 occupation, and is on a listed provincial, territorial or pilot pathwayPermit valid for at least 6 months after the family application is received; living in Canada while working
3. High-skilled worker, no permanent residence applicationHolds a valid work permit, port of entry letter or authorisation to work, is employed or to be employed in a TEER 0 or 1 occupation or a published list of TEER 2 and TEER 3 occupations, and lives in Canada while workingPermit valid for at least 16 months after the family application is received
4. British Columbia Significant Investment ProjectHolds a valid work permit or letter of introduction under a SIP agreement, is employed or has a job offer at any TEER, and lives in Canada while employedNo 16-month requirement. Job title code SIPSPOUSEBC, added March 23, 2026
5. Quebec foreign-trained medical professionalEmployed in NOC 31301, 32103 or 32120No 16-month requirement. Job title code CONJOINTSANTEQC, added May 25, 2026
6. Quebec permanent selection and free trade agreement holdersCertain holders of a Quebec permanent selection and spouses of workers covered by a free trade agreementSince June 5, 2026 certain Quebec permanent selection holders may apply

Two of these pathways have an important qualifier. The high-skilled pathway is open to spouses and common-law partners only, since January 21, 2025, and dependent children are not covered by it. And the pathway for workers who have not yet applied for permanent residence requires employment in a low-skilled TEER 4 or 5 occupation, which is a deliberate restriction aimed at families in lower-wage work.

The 16-month rule, and the 6-month rule

The 16-month test is the rule that decides most spousal applications, and it is easy to misunderstand because it is measured against a date that has not happened yet. The question is not whether the principal's work permit is valid for 16 months from today. It is whether the permit will still be valid for 16 months after the date your family application is received, which is a date in the future.

That changes the arithmetic in a way applicants miss. If your permit expires 14 months from now, and you apply in three months, the permit will have 11 months left at the moment of receipt, and you do not qualify. If you apply today, you have 14 months and you still do not qualify. The rule is not really about how long the permit is; it is about how much of it is left when the file is assessed, which is why the application date matters so much.

The 6-month test works the same way and applies to the two permanent residence pathways. It is considerably easier to satisfy, and the difference between a 6-month and a 16-month test is the difference between the low-skilled and high-skilled routes. A worker in a TEER 0 or 1 role who cannot meet 16 months may still be able to bring a family member if they are on a permanent residence pathway and meet the 6-month test instead.

There are two published exceptions to the 16-month rule, and they matter. A spouse of a foreign-trained medical professional recruited by Quebec is exempt, and a spouse of a worker arriving under the British Columbia Significant Investment Project is exempt. Both exceptions use their own job title code, which is how the file is routed to the right stream.

The occupation list for TEER 2 and TEER 3 roles

The high-skilled pathway accepts TEER 0 and TEER 1 occupations without a list, and TEER 2 and TEER 3 occupations only if they appear on a published list. The list exists because the policy intends to cover roles with a genuine labour shortage, and being in the right TEER band is not sufficient on its own.

This is where dates bite again. The list is published, and it is amended, so an occupation that was on the list when you read a guide may not be on it when you file. The check has to be made against the current published list, using the specific occupation code rather than the job title, because job titles in the same occupation code can differ between employers and provinces.

The two higher-risk bands are worth naming explicitly. TEER 2 covers college, vocational and technical occupations, and TEER 3 covers secondary school and trade occupations. A general-purpose office administrator, a customer service representative or a heavy equipment operator will often be in one of those bands without appearing on the list, and the refusal message tends to be generic. Checking the code first is the whole trick.

Who is not eligible

The exclusions are specific, and two of them surprise people.

  • Your refugee claim was referred to the Immigration and Refugee Board rather than processed by IRCC. A referred claim is on a different track entirely, and no family open work permit is available on it.
  • You are subject to an enforceable removal order.
  • You are an international student in a co-op programme, or an international student working off campus without a work permit of your own.
  • You already hold a spousal open work permit, in either direction of processing.
  • You hold a study permit, in the case of the high-skilled pathway.
  • You have applied for a post-graduation work permit but it has not received a positive decision at the time the spousal decision is made. The permit has to be approved first, and this is a sequencing problem rather than an eligibility problem.
  • In some regional pilot programmes, only dependent children and their children qualify, and a spouse has to use a separate route.

The timing point in the post-graduation work permit line deserves emphasis, because it creates a chain of dependencies. If a graduate applies for a post-graduation work permit and then a spouse applies for a spousal open work permit, the spousal file cannot be decided until the post-graduation file is approved. The two are processed in sequence, which means the spouse's timeline is the graduate's timeline plus the spousal processing time on top.

For the pilots where only children qualify, the practical consequence is that a family cannot be filed as one unit. The children go through the pilot route and the spouse needs an independent basis, which is often an employer-specific permit.

How to apply, and the sequence that catches people out

There are two ways to file a family application, and the difference matters. You can file together with the principal applicant, in which case you answer yes to the family member question in the same application and select the open work permit option. Or you can file separately, in which case the questionnaire routes your file differently depending on where you are and what your current status is.

Filing separately from outside Canada, you select a temporary stay of more than six months, you answer no to the public policy question, you answer yes to the spouse, common-law partner or dependent child question, and you select the option for a work permit for a spouse of an international student or a family member of a worker. Filing from inside Canada, you select your current status: visitor, student, worker or work permit holder.

IRCC processes a family application only after the principal applicant's application has been approved. That sequencing is worth planning around, because it means a family file can sit idle for months while the principal file is processed, and it is another reason to file the two applications together where you can.

The documents are not demanding. The core of the file is the application itself, a photocopy of your passport, one photo, and the documents that prove the relationship: a marriage certificate, birth certificates, adoption records, or a common-law declaration on form IMM 5409. Anything not in English or French needs a certified translation. What is often missing is the principal's supporting evidence, so it is worth asking your employer or your partner to send you a copy of their work permit and the offer of employment or assessment documents, because the file cannot be assessed without them.

Fees and processing times

The cost of a spousal open work permit is the standard work permit fee of C$155 plus the C$100 open work permit holder fee for each family member, and C$85 for biometrics if you have not already given them. If the family application is refused, the C$100 holder fee is refunded, but the processing fees are not, which is worth knowing before you file a file you are not sure about.

Element Amount (CAD) Note
Work permit, per person155.00Refunded only if the application is refused before processing
Open work permit holder fee, per family member100.00Refunded if the family application is refused
Biometrics, individual85.00Booked separately
Biometrics, family of two or more170.00Booked separately
Published processing time for the current spousal route95 daysNon-country processing time dataset, updated 21 October 2026

Ninety-five days is the current published figure for the spousal route, and it is much longer than the work permit times for applications filed from outside Canada, which run from 4 weeks in the United Kingdom to 16 weeks from inside Canada. The reason is that the spousal file is assessed after the principal's file, so the published figure reflects the whole chain rather than the assessment of the family application on its own.

Traps that cost families the permit

Five errors account for most of the lost spousal applications, and every one of them is avoidable.

  1. Applying when the 16-month test cannot be met. Because the test is measured against a future receipt date, a family that applies too early can end up worse off than one that waits for a better moment, and a family that applies when it cannot qualify has spent the fee.
  2. Using the wrong occupation code. The TEER band is not enough; the specific code has to be on the published list, and the list changes.
  3. Filing the family application before the principal's application is approved and assuming they run in parallel. They do not.
  4. Assuming a study permit is enough for the spouse of a student. The spouse-of-student test is separate, and the timing relative to the study permit has to be right.
  5. Leaving the relationship evidence thin. A marriage certificate with no birth records for the children, or a common-law relationship asserted with no form IMM 5409, is a file that gets returned before it is assessed.

A sixth trap is procedural rather than substantive, and it is the most common of all. If your status expires while the family application is pending, the maintained status that kept you legal ends with it. A renewal application filed late can be backdated by seven days, but the reliable protection is to renew before expiry and to treat the family application as something to start early rather than late.

How long the spousal permit lasts

A spousal open work permit is normally valid for one to two years, and it is bounded by three things rather than one: your passport, your biometrics, and the principal applicant's work permit. The third bound is the one that surprises couples, because it means the family permit can end well before its own printed expiry date.

The reason is structural. The basis of the family application is that the principal holds a qualifying status, so when that status ends, the family status goes with it. A principal whose permit is renewed keeps the family's time line intact; a principal whose permit is shortened, replaced or cancelled shortens the family's time as well. This is also why the 16-month and 6-month tests exist: they are the mechanism that keeps a family permit from expiring halfway through a year.

The practical habit is to diarise the expiry date of the principal's permit, the expiry of your own passport, and the expiry of your biometrics, and to work from the earliest of them. If the principal is likely to renew, the family's extension timing follows the principal's, not your own, and that is worth planning a year ahead rather than a month ahead.

The document checklist for a family application

The list is short, and the whole file is decided on whether it is complete and consistent.

Document Who provides it Notes
Application form IMM 1295The family memberFiled online in the IRCC secure account
Passport photocopyThe family memberThe travel document that will be used to travel
One photoThe family memberMeeting the visa photo specifications
Marriage certificateBoth spousesCertified translation if not in English or French
Birth certificatesBoth spousesFor each dependent child included
Adoption recordsWhere applicableFor an adopted child
Common-law declaration, form IMM 5409The family memberWhere the relationship is a common-law one
Copy of the principal's work permitThe principalNeeded to establish the pathway and the expiry date
Principal's offer of employment or assessment documentsThe principal's employerWhere the pathway depends on the occupation or the stream

Two practical notes. Every document that is not in English or French needs a certified translation, and the certification requirement applies to relationship documents as much as to employment documents. And the file is assessed after the principal's file, so the family member should ask the principal for a copy of their permit and employment documents at the same time as the application is prepared, rather than after the request arrives.

If the principal loses their job

A job loss changes the family file, and the direction of change depends on the pathway. On the high-skilled route, the principal is usually working in a TEER 0, 1 or listed TEER 2 or 3 role, and a job loss means a new work permit with new conditions and a period without work, which is a time when the 16-month test becomes harder rather than easier to satisfy.

The mechanics are the same as for any employer change. The principal needs a new job offer and has to apply to change the conditions on the work permit, and the IRCC response to that authorisation request takes about 10 to 15 days, longer on paper. Until the new permit is approved or written authorisation arrives, the principal must stop working for that employer, and for any employer.

For the family member, the practical points are these. If the family permit has not yet been approved, the principal's change of employer does not change the pathway the family application was filed under, but it can change whether the conditions still hold, and the assessment looks at the file as it stands. And if the principal's status changes to a permanent residence applicant, a different pathway opens for the family, and the 6-month test applies instead of the 16-month one, which can be an advantage if the family's timing is tight.

What the family member should not do is continue to work on a spousal open work permit while their own status has lapsed, and what they should do is keep their own renewals current, because the family permit is only as durable as the status that supports it.

Does the spouse's permit end when the principal's permit ends?

Yes. A family open work permit is bounded by three dates, and the earliest of them governs: your passport expiry, your biometrics expiry, and the expiry of the principal applicant's work permit. The third bound is the one that ends permits early in practice, because the whole basis of the application is that the principal holds a qualifying status.

That has a planning consequence that couples usually discover too late. If the principal renews their permit, the family route stays open and the family's extension follows the principal's timeline. If the principal's permit is shortened, replaced or cancelled, or the principal leaves Canada permanently, the family permit is affected even though nothing on its face has changed.

The reliable habit is to diarise the principal's expiry date alongside your own, and to renew the principal's permit first. A family that renews the spouse's permit while the principal's file is still pending ends up with a shorter family permit than it expected, and a second fee.

How do you extend a spousal open work permit?

You extend it the same way you extend any work permit, but with one condition that decides the outcome: the principal applicant's permit has to still be valid, and it has to remain valid for long enough to satisfy the pathway you are on. A family extension filed while the principal's own renewal is pending usually produces a shorter permit than expected, or a refusal.

The mechanics are a work permit extension filed online before your current permit expires, using the application to change conditions, extend your stay or remain in Canada as a worker. You pay the C$155 work permit fee, and the C$100 open work permit holder fee applies where a family member is being added. If you file before expiry you keep maintained status while the file is processed, and online applicants receive an extension letter that authorises them to keep working.

The practical sequence is to renew the principal's permit first, then file the family extension, and to diarise the 16-month or 6-month test against the date the family application will be received rather than the date you start preparing. The published work permit extension queue is the relevant timeline: 121 days on the non-country dataset and 12 weeks on the by-week dataset, with about 200,100 people waiting.

What to do next

The order of operations is short and each step prevents the next problem.

  1. Establish the principal applicant's exact status: a permanent residence applicant, a worker on a permanent residence pathway, a high-skilled worker, or a worker in one of the two new 2026 streams. That determines the pathway and the test you have to meet.
  2. Check the work permit expiry date against the test, counting from the date you would file rather than from today, and if the test fails, work out whether a change of status by the principal would open a different pathway.
  3. Confirm the occupation code against the published list if the role is in TEER 2 or 3.
  4. Gather the relationship documents, the passport photocopy, the photo and any certified translations, and ask the principal for a copy of their permit and employment documents.
  5. File online in the IRCC secure account, together with the principal where possible, and pay the C$155 permit fee plus the C$100 holder fee.
  6. Book biometrics when the instruction letter arrives, answer every document request, and keep your own status current throughout, because the family permit is bounded by the principal's permit and by your own status.

Because the tests are date-sensitive and the occupation list is amended, a short consultation with a licensed immigration representative or a department-authorised representative is often cheaper than a second application and a second fee.

Frequently Asked Questions

What are the new rules for spousal work permits in Canada?
Since January 21, 2025 the spousal open work permit for a high-skilled worker covers spouses and common-law partners only, and dependent children are no longer included in that pathway. The principal's work permit must be valid for at least 16 months after the family application is received, and the occupation must be TEER 0 or 1 or on a published list of TEER 2 and TEER 3 roles. British Columbia added a Significant Investment Project route on March 23, 2026, and Quebec added routes for foreign-trained medical professionals and permanent selection holders during 2026.
How long does it take to get a spousal work permit in Canada?
The published processing time for the current spousal route is 95 days, on the IRCC non-country dataset updated in October 2026. That figure covers the whole chain, because a family application is only decided after the principal applicant's application has been approved. If the principal's file is still open, the family file simply waits behind it.
Can a spouse work on a Canada work permit?
Yes, in several situations. If the principal is a high-skilled worker meeting the 16-month and occupation tests, or is on a permanent residence pathway meeting the 6-month test, or is in the British Columbia investment or Quebec medical streams, the spouse can apply for an open work permit. A spouse of an international student has a separate test, and a spouse of a worker in a low-skilled occupation has no route unless the principal is on a listed permanent residence pathway.
Does the spouse need a job offer?
No. The spousal open work permit is precisely the route for a family member of a worker who already has a job offer in Canada. The spouse's own open permit does not need one, and their employer does not have to file an assessment or pay the compliance fee. That is the practical advantage of an open permit over an employer-specific one, and it is why the family route is worth checking even when the spouse has a job in view.
Can I get a spousal work permit while my spouse is studying?
Spouses and common-law partners of international students are a listed open work permit category, but it is a separate test from the high-skilled route. The student's status and the marriage have to be in place when the application is filed, and the timing relative to the study permit matters. If the student is in a co-op programme, or is working off campus without a permit of their own, the family route is not available.
Can I get a spousal work permit if my spouse has a post-graduation work permit?
Not until the post-graduation work permit has received a positive decision, because the family file is decided after the principal's file and the rule excludes applicants whose post-graduation application has not been approved at the time the spousal decision is made. In practice the two files run in sequence, so the spousal timeline is the graduate's timeline plus the 95-day spousal processing time.
How much does a spousal work permit cost?
C$155 for the work permit, plus the C$100 open work permit holder fee for the family member, plus C$85 for biometrics for one person or C$170 for a family of two or more. The C$100 holder fee is refunded if the family application is refused, but the processing fees are not refunded.
What is the 16-month rule and how do I count it?
It is a test on the future, not the present. The principal's work permit must remain valid for at least 16 months after the date your family application is received. So a permit with 14 months left does not qualify today and will not qualify in three months either. The permanent residence pathways use a 6-month test instead, and the British Columbia and Quebec medical streams have no minimum at all.
For informational purposes only. Verify current requirements at official government websites. Consult a licensed immigration attorney for personalised legal advice.

Sources & Verification

This page is compiled from official Government of Canada publications — Immigration, Refugees and Citizenship Canada, Employment and Social Development Canada and the Job Bank. Every fee, deadline, wage threshold and processing time quoted here was checked against the source listed below. Work permit rules change often, and several measures in force now are time-limited, so confirm your own case at the source before you pay a fee or submit an application:

Last verified: October 22, 2026. Fees, wage thresholds, advertising rules and processing times change without notice — always confirm on canada.ca. See our editorial standards and full source list.